The Best Woodworking Finishes for Wood Turning
Until you develop into a proficient enough turner to skip sandpaper altogether, use it sparingly, only to smooth the wood, never to actually shape it. Start with 100 grit and work up to 280 grit. Wherever possible, sand the bottom of the turning as it spins on the lathe. Should the paper catch, it will be thrown clear of the lathe instead of pulling your hand over the turning.A spindle turning is best finished right on the lathe. A good finish seals the wood from dust and moisture while bringing out the natural beauty of the wood. Because they tend to obscure rather than enhance grain, stains are rarely used. Turnings are often finished with a combination oil-and-wax finish, although higher-gloss finishes, such as lacquer, can be applied; As with sanding on the lathe, run the machine at a slow speed to avoid splashing, always keep the tool rest clear of the work and finish the turning from underneath. Avoid using large cloths, as they can get snagged and pull your fingers into the spinning work.
The simplest and most natural finish for a spindle turning is often the one closest at hand.Natural oils from the shavings will impart a warm, burnished glow to the wood.
This author is an up and coming expert on crafts and DIY. You can download original TV stand plans and unique TV riser plan by going to woodworkingplans.tv; Or you can select from 14000 woodworking plans, make woodworking easier and more fun!